top of page

FOR SALE

Spec Racer Ford Gen 3

IMG_4226.jpg

1986 SCCA spec racer ford gen3 race car

$26,500  · Windham, New Hampshire

Message

Car w/ Shelby Wheels - $26.5K
Car w/ Spare Tail/Nose - $27.5K
Car w/ all spares - $30K
Car w/ all spares and Trailer - $37K

 

SCCA Spec Racer Ford Gen3 SRF3 Race Car. It is chassis #492, has been all over the country (job moves), and has never been in the big wreck. I have all of the history since 1999, and invoices for everything. It has been maintained by me or Motion Dynamics since 2005 (Shawn can vouch for the car). It was converted to Gen3 at end of 2014. The car is very fast, having had recent track records (as a Gen3) at NHMS, Thompson, Palmer, and Pocono (still there), with a driver that is 100lbs over minimum. Engine is strong, and Transmission was just redone by Motion Dynamics. Many victories, and Regional/Divisional championships. Car has been very reliable, less than 5 unexpected failures over the last 22 years, as I can recall. Frame is very straight, last corner balance was within 2lbs.

Car was not raced in 2021.

I have many spares as well, see all info below:
• Bodywork is at minimum (panels on the car) – front could use small lower fiberglass enforcement
• 1 complete/painted to match heavy set of front and rear body panels

• New Wilwood brakes (2019)
• New belts in 2020 (expire after 2024)
• New radiator in 2020
• Trans refresh (2020) (3 weekends) – straight cut, most recent gears
• New latest clutch (2020), new pressure plate (2020)
• New fuel bladder (2020) with new hose, filter sock, filter, etc
• Various new boots, axles (short and long), cv joints, clevis, rod ends over last 1-2 years
• 1 fiberglass corner for easy repair
• 2 sets of weld wheels (no issues with balance/damage) – dry tires
• 1 set of ‘red’ Shelby wheels – dry tires
• 1 set of steel wheels – rain tires
• 1 extra weld rear
• 1 extra steel wheel
• 2 extra ‘test day’ dry tires
• 1 new extra side Rub Rail
• Quick Jack (PBS?)
• Alignment bars
• Heavy duty SRF fitted cover – very nice
• Full LCA with new hubs/bearings; New rebuilt LCA/hubs/bearings on 2 corners last year
• Brake Bias
• Relatively new Momo suede steering wheel
• Fat boy fiberglass seat
• Redline Gear oil for Trans x3
• Fuel injection pump tester
• Various front aluminum pieces, rod ends/bolts/pins/CVs, Old starter, Old Koni’s x4, old brakes/calipers x4
• Track tire pressure data/info for many tracks in the Midwest and East Coast

Trailer is 24x8.5, 5200lb axles, AC, Electric w/ many lights, cabinets, new tires 2021, new suspension 2021, new floor 2020, 8 D-rings, screwless exterior, 1/2 carpet - 1/2 painted floor.  Interior is all white.  Setup for Spec Racer

Car is located in southern NH (03087). PM me on Facebook, email me sintrone (at) yahoo.com, or call me (603)-339-6377 for more info. Thanks.

bottom of page